Sensors Signal Contitioning
- Course Code: 1712
- Semester: 7th
- Course Type: Scientific Area - Skills Development (SA-SD)
- Course Category: Compulsory Optional (CO-OP)
- Scientific Field: Electronics (EL)
- Lectures: 4 hours/week
- Lab teaching: 2 hours/week
- ECTS units: 6
- Teching and exams language: Greek
- The course is offered to Erasmus students
- Recommended prerequisite courses: (1611) Synthesis of electronic circuits
- Instructors: Spasos Michail
The purpose of the course is to introduce the student to the basic concepts and types of sensors as well as to develop the ability to analyze and design the necessary electronic devices required for the processing of the weak electrical output of sensors signals. By successfully attending the course the student will be able to select the appropriate sensor needed to measure a physical size and design the appropriate electronic conditioning circuit that will process its output signal.
- Understand the operating principle of various types of sensors
- Select the correct sensor to measure a physical size from the manufacturer's data sheets
- Develop and design the appropriate electronic circuit (conditioner) for processing the sensor output signal
- Simulate the electronic processing circuit (conditioner) to confirm its calculations and design
- To construct the integrated measuring system including the sensor and its conditioner
- Compare the results of the actual circuit with those of the calculations and the simulation.
- Search, analyze and synthesize data and information, using the necessary technologies
- Decision making
- Independent work
- Exercising criticism and self-criticism
- Promoting free, creative and inductive thinking
Types of Sensors, passive sensors, active sensors.
Temperature sensors (thermistor, bimetallic, RTD, semiconductor)
Humidity sensors (ohmic and capacitive)
Position and Motion Sensors (Linear Variable Differential Transformer (LVDT), Hall)
Strain, force, pressure, flow sensors (ohmic, strain gage and semiconductor)
High resistance sensors for measuring luminance (photodiodes), acceleration (piezoelectric), acidity ph (chemical reaction),
Characteristics of measuring systems. Accuracy, precision, resolution, linearity.
V / V, V / I, I / V, I / I, signal converters with operational Amplifiers
Instrumentation amplifiers (INA). Differential amplifier, INA with two OpAmps, INA with three OpAmps, INA integrated circuits
Reference voltage sources, Reference current sources for floating loads, for loads with one end in supply rail and for grounded loads
Signal conditioners. Voltage dividers, current sources, DC and AC bridges,
Capacitance Multipliers, Gyrators, Precision Rectifiers, Peak Detectors, Sample and Hold Circuits.
Wired data transmission. 4-20mA current Transmitters, Frequency to voltage and vice versa (V / F and F / V)
Converters from Analog to Digital (A / D). Successive Approximation (SAR), (Σ-Δ ADC)
Digital to Analogue Converters (D / A), digital potentiometers
Teaching Methods - Evaluation
- Face to face theoretical teaching (discussion, problem, and exercises-solving).
- Laboratory training in groups of 2 students
Use of ICT means
- Use a PC to display slides
- PSpice Electronic Circuit Simulator (OrCAD) software.
- Using an online learning platform (moodle).
- Electronic communication with students.
|Preparation for laboratory exercises||34|
|Individual study and analysis of literature||68|
Final Written Examination (WE) (60%) including:
II. Evaluation of deliverable laboratory exercises (LAB) (40%)
- Weekly. preparation of laboratory exercise in groups of 2 students
- Weekly individual assessment of the content of the exercise.
III. Optional Written work and Public Presentation (20%)
- Individually assigned to students.
- Requires a public presentation of 15-20 minutes at the end of the semester.
- The scope and specifications of the work are defined at the beginning of the semester.
In order to be awarded credit, the total course (WE * 0.60 + LAB * 0.40) must be at least five (5). In addition, the independent grade in each of the assessment methods I, II must be at least four (4). The degree of optional work is added to the final grade if the above conditions are met
Assessment criteria are accessible to students on the MOODLE platform's website.
Recommended Bibliography through "Eudoxus"
- Spasos M., "Analog Sensor's Signal Conditioning", AIVAZIS Editions, 2018, ISBN: 978-960-549-003-4, Eudoxous code: 77112643.
- Kalovrektis K., Katevas N., "Sensors for measurement and control", TZIOLAS Editions, 3nd Edition, 2018, ISBN: 978-960-418-758-4, Eudoxous code:: 77106782
- Kalaitzakis K., Koutroulis, E., "Electrical measurements and sensors", Klidarithmos Editions, 2010, ISBN: 978-960-461-331-1, Eudoxous code:: 13771
Complementary greek bibliography
- Lang, Tran Tien, Electronic measurement systems, TZIOLAS Editions, 2000, ISBN: 978-960-721-991-6
Complementary international bibliography
- Manchini R., Op Amp for Everyone. Texas Instruments, 2002, SLOD006B
- Walt Kester, Practical design techniques for sensor signal conditioning , Analog Devices, 1999, ISBN-0-916550-20-6.
- Hank Zumbahlen, "Basic linear design", Analog Devices, 2007, ISBN 0-916550-28-1
- MDPI, Sensors
- IEEE, Transactions on Circuits and Systems